The operation and maintenance of ultrafine mill

More
4 days 8 hours ago #45124 by goldmine
goldmine created the topic: The operation and maintenance of ultrafine mill
Ultrafine mill is short for ultrafine powder grinding mill, which is also called superfine mill and that is a common industrial powder making machine mainly used for making powders with and processing calcite, limestone, marble and potash feldspar. The ultrafine mill has an irreplaceable market value position in the powder making process of minerals and it also has a very long history, so that many manufacturers of mining machinery carry out plenty of improvement on the basis of traditional mills in its performance and functions. The material types that can be processed by this grinding plant is also increasing, so that it can better and more timely satisfy the specific need of customers, and this gives it bright development prospect.
1. In the using process of clinker grinding station, there should be fixed staff watching its running process and this staff should have a certain technical level. Before the installation of this powder grinding mill, the operators should be given technical training to let them learn the principle and performance of this machine to get familiar with the operation because only getting familiar with the operation procedure can this powder grinding mill be better applied in production process.
2. Before starting the superfine mill, check whether there are foreign matters such as iron inside it, tightly close the big and small observation door, adjust the rotating direction of draught fan and main engine and make sure the vent valve in the full open position.
3. The starting order should be like this: analyzer, draught fan, main engine, feeder machine, turn on the valve for blast capacity and gradually turn down the drain tap and finally adjust the fineness of final products. When stopping it, first stop material feeding for about one minute and then stop the main engine, then stop draught fan and finally stop analyzer.
4. Material feeding control: the material feeding should be even and the highest output should be tested according to the load of the main engine under different material feeding amount, and iron materials like bolt are forbidden to go inside the machine.

Please Log in or Create an account to join the conversation.

You are not logged in.

Time to create page: 0.317 seconds

Our insurance company has "strongly suggested" that we tell you that Mountain Biking can be dangerous. If you're visiting this site it's very likely that you're already aware that if you insist on having a good time by riding your mountain bike, eventually you will almost certainly fall down and collect any number of boo-boos, dings and injuries, serious or otherwise, but we have to tell you anyway.

Mountain Biking is a potentially hazardous activity carrying a significant risk of bodily injury and even death. Mountain biking should only be undertaken if you have a complete awareness of these risks. You can reduce the level of risk by wearing a helmet and by riding within your own skill level.